GIANT PRI-17 —  Vibratory Deburring Machine

DESCRIPTION


The Giant Model PRI-17 Vibratory Deburring and Finishing Machine heavy duty design, as described and specified below:

Made in the U.S.A.

MACHINE SPECIFICATIONS


MACHINE TYPE | VIBRATORY DEBURRING
MODEL | PRI-17
CAPACITY | 17 CUBIC FOOT WORKING CAPACITY
LENGTH | 81 INCHES
WIDTH | 45 INCHES
HEIGHT | 48 INCHES
LOAD HEIGHT | 42 INCHES
SHIPPING WEIGHT | 2895 LBS
FLOOR SPACE | 25.3 SQ. FT.

TUB DIMENSIONS:


DIAMETER OF TUB AFTER LINING | 24 INCHES
LENGTH OF TUB AFTER LINING | 70 INCHES
MAXIMUM LOAD CAPACITY | 3000 LBS
LINING MATERIAL | 3/4 INCHES


MAIN COMPONENTS:


DRIVE UNIT | 10 HP T.E.F.C. Heavy Duty High Efficiency, 230/460 volts, 3 phase, 60 cycle motor. Customer to supply it’s own disconnect or Panel

MACHINE BASE | manufactured of steel beams and all welded construction for maximum rigidity. Floor mounting pads are furnished for 3/4" floor mounting studs.

VIBRATORY MECHANISM | Balanced Suspension Drive is mounted on heavy duty Spherical roller bearings in precision turned housings securely attached to the vibratory tub. This mounting is mounted on urethane pads and are off-set front to rear allowing a natural rolling action with less input from the eccentric train. This natural action results in extended bearing and tub life cycles. Bearings can be lubricated by an optional automatic fail safe system. Grease is injected into the bearings on a timed basis controlled by an adjustable solid state pulse unit located within the control panel. The vibratory unit is driven by V-belt and pulley arrangement from power unit. Variable amplitude is adjusted manually by adding additional weights to the eccentric bar.

THE VIBRATORY TUB | is constructed of heavy reinforced steel tube gusseted it's entire length. The welded structure is stress relived and shotpeened after welding to prevent fatigue. Rear end of tube is equipped with a plug discharge door, for discharging media into container. Drainage of contaminants from the machine is by means of perforated 1/8" diameter holes at bottom of tube. Effluent flows to drainage hoses leading to effluent container.


INCLUDED IN BASE PRICE:


  • 1. Balanced Suspension Drive vibratory mechanism
  • 2. Polyurethane lining
  • 3. Variable amplitude adjusted manually
  • 4. High efficiency motors
  • 5.complete as described, painted Giant Blue and ready for your field service connections


OPTIONAL EQUIPMENT:


VIBRATORY BEARING LUBRICATION Automatic fail safe, grease system for heavy duty spherical roller bearings on vibrator shaft. The system consists of: a reservoir, air operated pump, injectors, filter, necessary fitting and tubing and electrical controls for fail safe operation. Pump mechanism is solenoid operated so as to provide lubrication only when machine is in operation.

MANUAL AUTOMATIC GREASE SYSTEM for lubrication of the vibrator bearings. Consists of a reservoirs with grease and adjustable cycle.

ELECTRONIC VARIABLE SPEED DRIVE WITH DIGITAL TACHOMETER An AC inverter coupled directly to the motor controls the vibration frequency. Push buttons for increase or decrease of the vibration frequency are in the main panel. A digital tachometer provides a read-out of machine RPM.

JIC CONTROL PANEL U.L. Listed components housed in a nema type 12 enclosure. 460 voltage is transformed to 110 volts at operator controls. Includes start/stop push buttons, compound system selector switch and plug in receptacle, lapsed hour recorder, and fused disconnect.

AUTOMATIC PREMIXING COMPOUND SYSTEM designed to flow compound and water into vibratory mass on a continuous basis, to keep parts and media clean during processing. Complete with pump, mixing head, valves, spray headers, drain hoses and 15 gallon drum.

ST-55 SETTLING TANK powder coated with pullout sludge tray in first stage. 55 gal capacity, 14” high x 26” wide x 36” deep with 1” NPT overflow connection to drain.

AIR DOOR Pneumatic media discharge door, air valve controlled.

DBA REDUCTION PACKAGE allows unit to operate at an overall average of 85 DBA. System is constructed of a tubular steel frame with expanded metal holding the closed cell foam sheets. A custom fitted vinyl cover encloses the frame and foam. The cover is pneumatically activated with a switch at the main control panel.

TUB DIVIDER

START-UP ASSISTANCE


PRICING:


BASE PRICE: $581/month





CLICK HERE —  TO CONTACT BRIAN HALL — FOR PURCHASE & DELIVERY DETAILS