GIANT W5 — Vibratory Finishing Machine

DESCRIPTION


The Giant Wedge 5 5-cubic foot vibratory deburring and finishing machine features a reliable and durable design with fabricated heavy-duty steel construction and a tilt, ergonomic tub design for easier operator loading and unloading. The Wedge 5 offers a host of standard features as listed below.

*** MADE IN THE USA ***

Made in the U.S.A.

KEY FEATURES:


STEEL SHELL ENCLOSURE for superior sound dampening over competitors lid top cover.

TILT ERGONOMIC TUB DESIGN allowing operators better access for easier loading and unloading of parts (Exclusive with Giant)

URETHANE CASTER WHEELS allowing mobility throughout the shop area.

HINGED STEEL DOOR LID allows access, controls noise and overspray.

URETHANE RECESSED DIAMOND BAR DESIGN keeping flat parts from sticking to tub wall.

INVERTER/SPEED CONTROLLER A must for minimizing impingment and allowing for a larger volume of parts to deburr safely. Available only as an option with competitors.

CENTER DRAIN designed for a consistent even media/parts roll. Drain location on tub ends can cause uneven roll causing excessive part on part contact.

OPTIONAL DIVIDER provides (2) 2-1/2 cubic foot vibratory tubs with drainage available on each side of the divider.

REMOVABLE DRAIN PLUGS allowing different drain sizes for media as small as 4mm.



GIANT FINISHING, INC. Heavy Duty Engineered Systems known nation wide for their durability and reliable performance.

The same approach GIANT Finishing uses for their larger systems was designed into the "Wedge 5" Vibratory Tub.
Reliable ... Versatile ... Portable and Affordable
The "Wedge 5" is a hybrid of "Old School" Dependability in an Ergonomic Low Cost Profile


MACHINE SPECIFICATIONS


MACHINE TYPE | WEDGE 5 VIBRATORY FINISHING MACHINE
MODEL | W5
CAPACITY | 5 CUBIC FOOT WORKING CAPACITY
TUB LENGTH (inside) | 35-1/4 INCHES
TUB WIDTH (inside) | 19 INCHES
OVERALL HEIGHT | 39 - 47 INCHES
OVERALL LENGTH | 45 INCHES
OVERALL WIDTH | 31 INCHES
FLOOR SPACE | 9.7 SQUARE FEET
SIDE DOOR DISCHARGE HEIGHT | 22 INCHES
POLYURETHANE LINING THICKNESS | 3/4 INCH
POLYURETHANE HARDNESS | 90 DUROMETER
SHIPPING WEIGHT | 1040 LBS
MOTOR HORESPOWER | 1.5 HP
PAINT | POWDER COATED GIANT BLUE
DRIVE UNIT | 1.5 HP TEFC


STANDARD FEATURES:


BALANCED SUSPENSION DRIVE hinged sound cover, 110/230 volt on-off switch, media discharge door, easy access to parts, 10 gallon slide out settling tank with pump.
Casters for portability.

ELECTRONIC VARIABLE SPEED DRIVE: An AC inverter coupled directly to the motor controls the vibration frequency. Push buttons for vibration frequency control.


EQUIPMENT OPTIONS:


230/460, 3 PHASE, 60 CYCLE MOTOR (Customer to supply their own disconnect)

CONTROL PANEL - NEMA 12 including 0-1 hour process timer and receptacle.

Standard voltage: 230 or 460/3PH/60HZ

NOTE: Electrical controls and components for the herein quoted equipment are of standard design using I.E.C. components and do not represent individual customer requirements. If special machinery specifications, i.e., electrical controls and/or components do exist, please submit to Giant Finishing, Inc. for evaluation and re-quotation purposes.

OTHER VOLTAGE IS AVAILABLE UPON REQUEST. CONSULT FACTORY FOR ADDITIONAL CHARGES.

ST-55 SETTLING TANK Powder Coated with pullout sludge tray in first stage. 55 gal. capacity, 14" H x 36" W x 36" D with (2) 1" NPT overflow connection to drain.

AUTOMATIC PREMIXING COMPOUND SYSTEM designed to mixed compound and water into vibratory mass on a continuous basis, to keep parts and media clean during processing. Complete with pump, mixing head, valves, spray headers, 15 gal drum and drain hoses.

CARTRIDGE GREASE SYSTEM for lubrication of the vibrator bearings. Consists of a reservoirs with grease and adjustable cycle

TUB DIVIDER

SOUND PACKAGE machine will be lined with noise reduction foam to keep machine running under 84 dba

CURVED URETHANE REAR WALL


PRICING:


BASE PRICE: $128/month





CLICK HERE —  TO CONTACT BRIAN HALL — FOR PURCHASE & DELIVERY DETAILS