HZ-60 Centrifugal Barrel Finishing Machine

MAIN MOTOR – • 5 HP Leeson Brand
• Fan Cooled (TEFC)
• 230-460v (Please Specify on Order)
• Three Phase, 60 hertz

BARREL ROTATION MOTOR – • 1.15HP
• 230/460V, 3 phase, 60 hertz.

MACHINE VOLTAGE – 230-460 volt-(Please Specify on Order)

ELECTRICAL REQUIREMENT – 30 Amp Breaker Minimum

TOTAL CAPACITY – 2 cubic feet

APPROXIMATE SHIPPING WEIGHT – 2700 lbs. (Machine only)

OVERALL DIMENSIONS – • 68″L x 40″W x 90″H (machine only)
• 89”L x 40”W x 90” H (With Separator)
• 100” x 79.5” footprint with drain pan option

MACHINE CONSTRUCTION – • Heavy duty steel
• All welded construction
• Reinforced, gusseted, and welded to maximum strength

PAINT – • Shot Blasted
• Heavy duty powder coat
• Scratch resistant

BARREL CONSTRUCTION – • 25.75”L x 6”W
• Four hexagonal barrels with removable lids
• Cam locks for secure operation

BARREL LINERS – • Hot poured polyurethane
• ¼” thick
• Field replaceable
• 11 Divider slots, 12 individual chambers possible

BARREL COVER LIFT – • Air driven system for removing covers
• Controlled via toggle switch on control panel

CONTROL PANEL – • NEMA 12 enclosed panel
• UL Certification Available
• Allen Bradley buttons and switches
• 0-100 Hour cycle timer mounted on panel
• Power jog of turret

VARIABLE SPEED DRIVE – Allen Bradley PowerFlex 525

BRAKE – • Automatically stops the turret when a stop is activated or cycle is completed
• Activated if door is opened

SAFETY INTERLOCK – • Prevents door from opening during operation
• Machine must be powered on in an idle mode to disengage lock
• Can only be opened after cycle is finished